A-A-1036B
January 12, 1987
SUPERSEDING
A-A-1036A
April 17, 1980
COMMERCIAL ITEM DESCRIPTION
WIRE FABRIC (Insect Screening)
The General Services Administration has authorized the use of this
Commercial Item Description in preference to Federal Specification RR-W-365,
Types III, IV, VI, and VII.
This commercial item description covers wire fabric suitable for denying insects access to buildings through windows, doors, and other entrances.
Salient characteristics:
The wire fabric shall be one of the following types:
Type I- Commercial Bronze
Type II- Carbon Steel
Type III- Aluminum Alloy
Type IV- Corrosion Resistant Steel
Length. The wire fabric shall be furnished in a roll with a minimum length of 100 feet.
Continuity. The roll shall contain not more than two pieces, one of which shall be not less than 90% of the required length.
Width. The roll shall be furnished in the following widths as specified: 24, 26, 28, 30, 32, 34, 36, 42, or 48 inches.
Filament size. Unless otherwise specified, the wire diameter shall be 0.011 inch.
Mesh size. The number of openings per linear inch shall be 18 in the warp direction and 14 or 16 as specified in the fill direction.
Crimp type. The mesh shall be crimped at the intersections to lock the wires in place.
Edge type. Both edges of the roll shall be selvaged to prevent raveling.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business